Wednesday, April 17, 2013

Tutorial, part the fifth

And a good Wednesday morning to everyone!

Continuing with the piece. Overcast stitch the center padding (like satin stitch, just not angled) I used two strands of DMC floss. Doing this, gives your area of turkey stitch a nice border, and keeps the edges clean.
Next we start the Turkey stitch Mary Corbett has a wonderful video tutorial and description of the stitch, at the link.
I'm working with three strands of DMC you can work with more, of course, but I find this to be more manageable, and trims up nicely. I'm using a toothpick to keep the loops, more or less, even. It makes the trimming go a lot smoother, if you use a gauge like that. For smaller sections, I'll use a thick wire.

As you finish each row, trim your loops. You'll find that it's a lot easier to get all the loops trimmed if you cut them as you go. If you wait to the end, you'll find that you've got uncut loops, and they reflect the light differently. (you may like the effect. I really don't)

For this one, use the heavier needle, you will want the extra length, and sturdiness to grab onto. (this is from the file of lessons learned the hard way. don't be like me)

Also, the denser the stitch is worked, the more full the pile is. And it just looks better.

MOST IMPORTANT: Do NOT, I repeat DO NOT attempt to trim and shape the fluff until the whole area is finished. Also, do not start trimming and shaping on one day, and come back the next to finish it. You will find a ridge, or line forms, and you will never get rid of it, unless you pull it out and start all over. (Once again, don't be like me)

Trim and shape the fluff. Work methodically from the outer edges to the inner section. This will give the fluff a nice domed shape. As you're going, stop and fluff the fluff with an eyebrow brush. Really work the bristles in, since that's what separates the floss strands and makes it look like lush carpeting.

That's all for today. Tomorrow we'll add the beads/pearls.

Happy Stitching!

2 comments:

Neesie said...

Hello,
I know this is a post from several years ago, but I just discovered your site. I was wondering how this project turned out. It looks very interesting, but there is no finished product post (to my knowledge).
Thank you for taking the time to read this.

beard5 said...

Thank you for reading!Unfortunately the posts that followed this one got eaten by the internet, and were lost when my computer crashed. (it was a very bad week) I'll be doing another series like this, probably in March. The quality of the photographs may not be quite as good (I'm using my phone now) but I think they'll be clear enough to show what is happening.